Versatile Quick Release Pedestal Organizer.

Allows for quick and easy removal of unit in order to attach binnacle cover, store below to prevent theft or for racing purposes.

Holds four drinks or two drinks and a pair of binoculars. 3 5/8″ inside diameter accommodates larger drinks as well as cans and bottles with insulated sleeves.

Walled center section with drain holes conveniently holds small items.

Center opening measures 7 3/4″ wide at widest point, 3 1/4″ at the narrowest point.

Overall width 16 5/8″, depth including bracket 6 1/4″.

Measures 3″ from the top of the base to the top of the retainer ring.

Bracket width 15″.  Bracket depth 1.5″.

Bracket attaches with two UniClamps that allow attachment to pedestal guards with 1″, 1 1/8″ or 1 1/4″ diameter tubing

and center to center spacing of 9 1/2″, 12″ or 12 1/2″.

For best fit select the correct clamp diameter for your tubing size.

Questions about measuring? Click here: How To Measure

Additional slot on the front edge is a convenient location to hang a pair of sunglasses or any unit or holder with a belt clip.

Back edge of bracket sets flush with the forward edge of pedestal guard tubes.

If the compass sets forward of the leading edge of the pedestal guard tubes see item V0027.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Mounts to flat bulkhead without the clamp.

Proudly Made in Texas, USA!

Versatile Quick Release pedestal mounted drink holder.

Allows for quick and easy removal of unit in order to attach binnacle cover, store below to prevent theft or for racing purposes.

Holds four drinks or two drinks and a pair of binoculars. 3 5/8″ inside diameter accommodates larger drinks as well as cans and bottles with insulated sleeves.

Center opening measures 7 3/4″ wide at widest point, 3 1/4″ at the narrowest point.

Overall width 16 5/8″, depth including bracket 6 1/4″.

Measures 3″ from the top of the base to the top of the retainer ring.

Bracket width 15″.  Bracket depth 1.5″.

Attaches with two UniClamps that allow attachment to pedestal guards with 1″, 1 1/8″ or 1 1/4″ diameter tubing

and center to center spacing of 9 1/2″, 12″ or 12 1/2″.

For best fit select the correct clamp diameter for your tubing size.

Questions about measuring? Click here: How To Measure

Additional slot on the front edge is a convenient location to hang a pair of sunglasses or any unit or holder with a belt clip.

Back edge of bracket sets flush with the forward edge of pedestal guard tubes.

If the compass sets forward of the leading edge of the pedestal guard tubes see item V0023.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Mounts to flat bulkhead without the clamp.

Proudly Made in Texas, USA!

Versatile Quick Release pedestal mounted drink holder.

Designed to be quickly removed in order to attach binnacle cover, store below to prevent theft or for racing purposes.

Holds four drinks or two drinks and a pair of binoculars. 3 5/8″ inside diameter accommodates larger drinks as well as cans and bottles with insulated sleeves.

Center opening measures 7.375″ at the widest point, 2 7/8″ at the narrowest pont. Measures 3″ from the top of the base to the top of the retainer ring.

Overall width 17 3/8″.  Depth including bracket 5 1/2″.  Bracket width 15″.  Bracket depth 1.5″.

Bracket attaches to pedestal guard with two UniClamps that allow attachment to pedestal guards with 1″, 1 1/8″ or 1 1/4″ diameter tubing

and center to center spacing of 9 1/2″, 12″ or 12 1/2″.

For best fit select the correct diameter clamp for your tubing size.

Questions about measuring? Click here: How To Measure

Back edge of drink holder is flush with forward edge of pedestal guard tubes.

If the compass on your boat extends forward of the pedestal guard tubes please see item V0023.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Proudly Made in Texas, USA!

Pedestal mounted drink holder. Holds four drinks or two drinks and a pair of binoculars. 3.625″ inside diameter

accommodates larger drinks as well as cans and bottles with insulated sleeves.

Center opening measures 7.375″ at the widest point. Measures 3″ from the top of the base to the top of the retainer ring.

Tool Free!  Snaps onto pedestal guard.

Back edge of drink holder is flush with forward edge of pedestal guard tubes.

If the compass on your boat extends forward of the pedestal guard tubes please see item M0023.

Attachment is pedestal guard specific. Select your pedestal guard dimensions from the pull down menu.

Questions about measuring? Click here: How To Measure

Unsure of pedestal guard dimensions? Please see item V005.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Proudly Made in Texas, USA

Pedestal mounted drink holder. Holds four drinks or two drinks and a pair of binoculars. 3 5/8″ inside diameter

accommodates larger drinks as well as cans and bottles with insulated sleeves.

Center opening measures 7.75″ at the widest point. Measures 3″ from the top of the base to the top of the retainer ring.

Back edge of drink holder sets 1″ forward of the forward edge of pedestal guard tubes to allow clearance for compass pedestal.

Tool Free!  Snaps onto pedestal guard.

Attachment is pedestal guard specific. Select your pedestal guard dimensions from the pull down menu.

Questions about measuring? Click here: How To Measure

Unsure of pedestal guard dimensions? Please see item V0023.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Proudly Made in Texas, USA!

Practical pedestal organizer holds four drinks or two drinks and a pair of binoculars. 3 5/8″ inside diameter

accommodates larger drinks as well as cans and bottles with insulated sleeves. Center opening measures 7.75″ at widest point.

Measures 3″ from the top of the base to the top of the retainer ring. Walled in center section securely holds small loose items.

Additional slot on the front edge is a convenient location to hang a pair of sunglasses or any unit or holder with a belt clip.

Back edge of drink holder sets 1″ forward of the forward edge of pedestal guard tubes to allow clearance for compass pedestal.

Snaps onto pedestal guard.

Attachment is pedestal guard specific. Select your pedestal guard dimensions from the pull down menu.

Questions about measuring? Click here: How To Measure

Unsure of pedestal guard dimensions? Please see item V0027.

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Proudly Made in Texas, USA!

Large pedestal mounted cockpit table. Measures 17.5″ wide by 24″ long.

Snaps and clamps onto pedestal guard. Table is self-supporting and folds and snaps in the closed position.

Attachment is pedestal guard specific. Select your pedestal guard dimensions from the pull down menu.

Questions about measuring? Click here: How To Measure

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Proudly Made in Texas, USA!

Large pedestal mounted cockpit table. Measures 17.5″ wide by 24″ long. Snaps and clamps onto pedestal guard.

Table is self-supporting and folds and snaps in the closed position.

Includes cut outs for wine glasses on the forward end of the table.

Attachment is pedestal guard specific. Select your pedestal guard dimensions from the pull down menu.

Questions about measuring? Click here: How To Measure

CNC Machined from marine grade HDPE and assembled with stainless steel hardware,

Proudly Made in Texas, USA!

Versatile winch handle holder holds standard winch handles as well as the larger single hand winch handles.

Measures 7 1/2″ from the top of the base to the top of the retainer ring.

UniClamp fits tubing diameters from 7/8″ to 1 1/4″.

For the best fit select the correct clamp diameter for your tubing size.

Questions about measuring? Click here: How To Measure

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Mounts to flat bulkhead without the clamp.

Proudly Made in Texas, USA!

4″ diameter universal mounting pad attaches to pedestal guard or vertical stanchion with a UniClamp

that allows attachment to tubes with a diameter ranging from 7/8″ to 1 1/4″.

For the best fit select the correct diameter clamp for your tubing size.

Questions about measuring? Click here: How To Measure

CNC Machined from marine grade HDPE and assembled with stainless steel hardware.

Mounts to flat bulkhead without the clamp.

Proudly Made in Texas, USA!